New Odd'l Design - LITTLE GREEN MAN - First Drawing to Prototype

The New Odd'l Rockets Little Green Man design came from an email suggestion. I was asked to come up with an original design. I never knew a few sketches could end up being a new kit.

Here's the first drawing of the Little Green Man.
Some of the design elements were inspired by online cartoon images.
But I had to make it my own.
Besides, this drawing looked like a Little Green Baby.

Four re-draws later and I had enough to start the prototype. 

The eyes are now closer to the old Warner Bros. cartoon eyes.
The mouth got even longer and a lower lip was added.
During the build the small hands were changed for more balsa grain strength.
The fin-leg outside edge angles were changed. The feet were at too low an angle.
The left and right antennas were flipped, the bent, short antenna is now over the taller eye.
The hands were glued on a little lower on the body to make the torso smaller.
The belt and ray gun were added.
Fingernails, toenails and a bigger tooth were needed.

The finished prototype - The Odd'l Rockets
LITTLE GREEN MAN!

It's always interesting to see your finished designs in 3D.
This one still keeps the looks of the final drawing.
Now I've just got to build a few and test fly a dozen times!

For the next build - 
It might need four legs to set the flat feet forward.
The hands will probably end up like the second drawing with just two fingers. The nails would be water slide decals in a darker green, not blue.
Talk about child bearing hips! I'll fix that.
The belt buckle still needs some tweaking. Maybe some belt loops?
The ears will be glued higher on the head, one higher than the other.
Oh, on the back side, add a ray gun under the belt!

You should see how many changes the Pigasus design went through before being kitted.
Most changes were subtle but needed for strength and easier assembly.

The prototype build will follow!