Sunday, June 7, 2015

New, Larger Ceramic BLAST! Deflector


I just got the first shipment of Odd'l Rockets Ceramic BLAST! Deflectors in the mail!

On the left is the older deflector, on the right is the new wider design. The molds were made from an actual MPC ceramic deflector.
The new design works well with most all LPR models.
The hole at the top is drilled for a 1/8" rod and is easily enlarged for 3/16" rods with a small jewelers file.

Check your Odd'l Rockets vendor for availability.
If they are not there yet, ask to be notified when they arrive.

2 comments:

  1. Congrats! Looking forward to getting one, if I can manage it.

    Question: What'would be the minimum distance you'd want between the motor nozzle and the top of the BLAST! Deflector?

    Thanks! (I still owe you a field report on the new CWF.)

    ReplyDelete
    Replies
    1. Hi Bob,
      I would still raise the nozzle end an inch to inch and a half above the deflector.
      JonRocket got the first order, they only have one left. Apogee gets 10 early next week.

      Delete